Float kit installation
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- cverdoljak
- Posts: 55
- Joined: Thu Sep 13, 2012 4:03 pm
Float kit installation
Looking for float kit installation information, does anybody have installation drawings or any other paperwork for installing a float kit, I have a 52 B model with c-145
- cverdoljak
- Posts: 55
- Joined: Thu Sep 13, 2012 4:03 pm
Re: Float kit installation
I'm not looking for part numbers, I have a parts book.
-
- Posts: 449
- Joined: Mon Dec 13, 2010 3:49 am
Re: Float kit installation
I did send the drawings to the club some time ago. I think they are available to members but not sure. Bruce???
It's not done till it's overdone
Re: Float kit installation
The parts book shows where all the cessna stuff goes and call edo, they use to sell the float drawings.
Tim
- Green Bean
- Posts: 163
- Joined: Tue May 06, 2003 2:13 am
Re: Float kit installation
Edo/Kenmore Air - Check with Eric Johanson or Stepen Steininger at 6321 NE 175th St, Kenmore, WA 98028 (email edo@kenmoreair.com - Ph. 425-482-2257, or 800-423-5526. They have all the information you will ever need for an Edo installation. Good folks.