Checking the Fuel – Wing Strut
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Checking the Fuel – Wing Strut
Hello!
I don’t trust the fuel gages, so every time before flying I climb the wing and use a ‘stick’ to measure the fuel. My question to you is how to climb the wing? Ideally it should be done with a ladder, but sometimes there simply is not a ladder around for that, so how do you do? I step where the wing strut meets the fuselage and try not to place too much weight on the other foot. I knows it is not a good idea to step there, but is there another option? I have seen 172’s with a step next to the engine but have never seen a 170 with that. The L-19 also has the steps, has anyone installed one in a170? So when you must check the fuel and there is not a ladder around how do you do it? Thanks.
Donovan
I don’t trust the fuel gages, so every time before flying I climb the wing and use a ‘stick’ to measure the fuel. My question to you is how to climb the wing? Ideally it should be done with a ladder, but sometimes there simply is not a ladder around for that, so how do you do? I step where the wing strut meets the fuselage and try not to place too much weight on the other foot. I knows it is not a good idea to step there, but is there another option? I have seen 172’s with a step next to the engine but have never seen a 170 with that. The L-19 also has the steps, has anyone installed one in a170? So when you must check the fuel and there is not a ladder around how do you do it? Thanks.
Donovan
Donovan, I have installed the step and the wing strut foot rest on mine. They came off the 180's float kit. I put doublers behind the foot rest on the boot cowl. and the strut step just strap on. most ow your weight is on the step and the strut is for balance. if I knew how I'd post a pic. if you are going to Galveston you can look at them. I also use to step on the wheel pants till I painted the plane- now that's a NO NO.
use the little folding 2 step step ladder. Ron
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
President 86-88
53 C170-B N74887, people choice 2003, Best original B 2007
46 7BCM champ N2843E Rebuilding stage
Cajun Connection way down south, most of you are yankees to me!
53 C170-B N74887, people choice 2003, Best original B 2007
46 7BCM champ N2843E Rebuilding stage
Cajun Connection way down south, most of you are yankees to me!
BL, very true I've got one left and don't like the way it may twist at times. be sure to put a l o n g red flag on it. Somewhere in south La. someone is wondering what the hell is this and how did it get in my yard?
It's pretty hard to leave the folding step in front of the wheel! ENOUGH SAID!! Ron
![Embarassed :oops:](./images/smilies/icon_redface.gif)
![Embarassed :oops:](./images/smilies/icon_redface.gif)
President 86-88
53 C170-B N74887, people choice 2003, Best original B 2007
46 7BCM champ N2843E Rebuilding stage
Cajun Connection way down south, most of you are yankees to me!
53 C170-B N74887, people choice 2003, Best original B 2007
46 7BCM champ N2843E Rebuilding stage
Cajun Connection way down south, most of you are yankees to me!
-
- Posts: 369
- Joined: Sat Jan 21, 2006 6:27 am
Check out this thread. I use mine on a regular basis.
http://www.cessna170.org/phpBB2/viewtop ... light=step
http://www.cessna170.org/phpBB2/viewtop ... light=step
Richard
N3477C
'55 B model (Franklin 6A-165-B3 powered, any others out there?)
N3477C
'55 B model (Franklin 6A-165-B3 powered, any others out there?)
-
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Thanks for the information Richard. I've been looking for one of these for a long time. I emailed Larry and he replied the same day. The price is still $80.00 ea and $12.00 shipping for up to three steps mailed to the same U.S. address.
![Image](http://geocities.com/hilltop170/IMG_5232_1_1.JPG)
Last edited by hilltop170 on Sat Dec 15, 2007 4:50 pm, edited 1 time in total.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
Fuel Measurement/Fuel Gauges
A good backup to the fuel gauges is a JPI fuel flow instrument. I added one to my 170 and it has been very accurate. It also interfaces with the gps and will estimate how much fuel you will have at your destination.
trake wrote:PLEASE dont put those ugly steps and handles on a pretty plane like a 170. Thats number 17 on my list of dumb mods.
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
That's a wonderful difference in airplane ownership..... personality!
I personally am an originality-nut. (Although there are many, invisible mods to my '53 170-B)... I personally have a preference for original (appearance) airplanes.
There are a great many mods out there that make this a more useful airplane, and many owners avail themselves of those mods. The best ones, (in my opinion) are those that do not obviously alter the appearance of the airplane, yet provide measureable safety and operational advantages.... such as: Cleveland wheels/brakes, BAS tailpull handles, Pponk gearbox strengthening-kit, shoulder-harnesses, solid-aluminum (ski) or hollow steel axles, parking-brake disabled, ...and a few others, but those are the major ones....
... but above all, enjoy your personal preferences and maintain it, maintain, it, maintain it. We are only caretakers of these things. Their long-term existence is a testimonial to our short-term ownership of these fantistic, classic, great airplanes!
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.![Wink ;)](./images/smilies/icon_wink.gif)
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
![Wink ;)](./images/smilies/icon_wink.gif)
-
- Posts: 59
- Joined: Thu Oct 06, 2005 12:30 am
Somehow the idea of standing on a major structural element designed for tension like a wing strut just doesn't seem like a good idea to me. Plus, the thing is 50+ years old. The strut is nothing more than a hollow tube that has been formed into a teardrop shape. I doubt that Cessna engineers designed it to withstand a 150-300 pound concentrated, bending load. I suggest buying a simple folding stepladder from A/C Spruce or other and stowing in the baggage compartment as I have for years.
regards,
Kent Misegades
N2758D 1952 C-170B
Kent Misegades
N2758D 1952 C-170B
-
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Kent-
I agree with you, standing on the strut, even at the end of it, is not doing any good.
I bought Larry's step and just received it last week. It is an excellent device and worth the money. It works as-advertised and with the cleated surface, your foot will not slip off. You will never have to look for a ladder again. You could use two on one gear leg but if you can stand on one foot it's all you need. I go ahead and balance by placing my other foot on the strut at the fuselage but without placing any pressure on the strut.
I agree with you, standing on the strut, even at the end of it, is not doing any good.
I bought Larry's step and just received it last week. It is an excellent device and worth the money. It works as-advertised and with the cleated surface, your foot will not slip off. You will never have to look for a ladder again. You could use two on one gear leg but if you can stand on one foot it's all you need. I go ahead and balance by placing my other foot on the strut at the fuselage but without placing any pressure on the strut.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!