Bartone heater
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 517
- Joined: Thu Aug 12, 2004 10:33 pm
Bartone heater
Does anybody have any comparitive experience with the heater performance of the Bartone exhaust vs the Hanlon Wilson setup? Also does anybody have a URL for the Bartone system, are they still available?
The Bartones are just exhaust pipe extensions. They clamp onto the existing HW mufflers so there should be no impact on the heating system at all. Simply replace the exhaust pipes/fangs with the Bartone pipes and the exhaust is routed out the opening at the aft end of the cowl instead of the regular exhaust holes at the bottom of the cowl.
Doug
And....Pat Bartone may still be contacted via his info in the membership directory. He reportedly no longer supplies the STC for his tailpipes and a field approval or other basis will be required. Contact him for details.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
- Posts: 517
- Joined: Thu Aug 12, 2004 10:33 pm