Atlee Dodge Seats (upholstery)

floatflyer · Post by **floatflyer** » Sun Apr 07, 2013 1:59 am

I just finished installing the Atlee Dodge jump seats in my 170B. I'm looking for upholstery ideas, if anyone has pics they would be willing to share. Thanks

bigrenna · Post by **bigrenna** » Sun Apr 07, 2013 2:20 am

delete

hilltop170 · Post by **hilltop170** » Sun Apr 07, 2013 5:59 am

Fine Line Interiors, www.finelineupholstery.com , (907) 349-4442, in Anchorage makes nice ones.

floatflyer · Post by **floatflyer** » Tue Apr 09, 2013 4:18 am

I am going to be in Anchorage this week and will try to look them up. - Thanks

hilltop170 · Post by **hilltop170** » Tue Apr 09, 2013 6:23 am

If you have time while you're in Anchorage, go by Merrill Field and check with Stoddard's Aircraft Parts Center and Reeve Airmotive, both good potential sources.

bigrenna · Post by **bigrenna** » Tue May 21, 2013 4:22 pm

delete

bigrenna · Post by **bigrenna** » Fri Jun 07, 2013 2:03 pm

delete

daedaluscan · Post by **daedaluscan** » Sat Jun 08, 2013 12:09 am

Just to make me really sick with jealousy could you show them stowed?

I want a pair of these soo bad.....

bigrenna · Post by **bigrenna** » Mon Jun 10, 2013 12:29 am

delete

bigrenna · Post by **bigrenna** » Tue Jun 11, 2013 12:54 am

delete

bigrenna · Post by **bigrenna** » Tue Jun 11, 2013 11:09 am

delete

swixtt · Post by **swixtt** » Wed Jan 07, 2015 6:40 pm

Greg, did you end up doing Jumps in the 170 or just the 180?
my seats overall are rough and will need some TLC so that is how i hit this thread. when you cleaned up the seats did you strip and paint before shipping them off to Ron?

JohnNielsen · Post by **JohnNielsen** » Fri Jan 16, 2015 2:50 pm

This is the shop in Palmer AK that did my seating. I stripped all the metal support stuff off, cleaned, painted and covered the seat frames with ceconite and dope. http://www.sportaircraftseats.com/sport ... /Home.html

John

bigrenna · Post by **bigrenna** » Fri Jan 16, 2015 6:45 pm

delete

swixtt · Post by **swixtt** » Fri Jan 16, 2015 7:03 pm

Thanks... i'm hoping to do the same at some point this spring but am sourcing a local first to see. i did send Ron an email but never heard back from him.
probably best to call when i get to the point of redo.

The International Cessna 170 Association