Exhaust system for engine C-145-2H

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
XB-VIA
Posts: 3
Joined: Fri Apr 15, 2016 6:01 pm

Exhaust system for engine C-145-2H

Post by XB-VIA »

good afternoon, have all of you today I would like to ask your help to get the exhaust system for my Cessna 170B 1954 with a C-145-2H engine I NEED THE COMPLETE SYSTEM OR THE PIPES THAT EXIT THE ESCAPES OF THE CYLINDER FROM THE SIDE LEFT THAT HAS A FORM OF TRIDENT OR A CATALOG OF PARTS OR PRICE PER PIECE, IN WAITING OF ITS COMMENTS, DISCUSS ME BY GRATEFULING YOU IN ADVANCE YOUR FINE ATTENTION FOR THIS APPLICATION.
User avatar
Bruce Fenstermacher
Posts: 10313
Joined: Tue Apr 23, 2002 11:24 am

Re: Exhaust system for engine C-145-2H

Post by Bruce Fenstermacher »

Of course the Cessna IPC has all the parts numbers.

AWI is one supplier of most of the parts. https://awi-ami.com/cessna-170a-b-exhau ... pped-image

What they don't have, and I'm not sure anyone does, is the shroud seals. Been a while since I've price it but I'd bet if you need everything it will set you back near, if not more, than $2500. Hopefully you won't need every part. Sounds like maybe you only need some parts.

There are other suppliers of these parts of course. I think you'll find their prices nearly the same as AWI on the parts they do have. I think AWI may have the largest number of the parts compared to others.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Post Reply