Does anyone know of a shop/contractor/person who is skilled in this? (And available and willing)
I’d like to pay someone to complete the drawings based on already chosen equipment.
Any recommendations would be appreciated.
Thanks!
Disclaimer: This is for a supercub...gasp..
Someone to make a wiring diagram for new panel
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Re: Someone to make a wiring diagram for new panel
Most avionics installers do this on a regular basis and can make up a harness as well.
I would use a local avionics shop where you can coordinate in person with them.
I would use a local avionics shop where you can coordinate in person with them.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
Re: Someone to make a wiring diagram for new panel
hilltop170 wrote:Most avionics installers do this on a regular basis and can make up a harness as well.
I would use a local avionics shop where you can coordinate in person with them.
+1
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.