wing and other sheetmetal repair

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
Alaska_5
Posts: 7
Joined: Wed Oct 08, 2014 4:46 am

wing and other sheetmetal repair

Post by Alaska_5 »

Looking for a repair shop to do several wings and other surfaces at a reasonable price. Any suggestions? Not sure there is one on the west coast .Would travel as far as Minnesota, Im in Oregon. Thanks for any suggestions
User avatar
cessna170bdriver
Posts: 4059
Joined: Mon Apr 22, 2002 5:13 pm

Re: wing and other sheetmetal repair

Post by cessna170bdriver »

Three states south of Minnesota is Arkansas. Call Del Lehmann or Brett Hamm at Mountain Airframe in Mena. Excellent work, reasonable rates.

http://mountainairframe.com/
Miles

“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
Alaska_5
Posts: 7
Joined: Wed Oct 08, 2014 4:46 am

Re: wing and other sheetmetal repair

Post by Alaska_5 »

Thank you , I will give them a call.
User avatar
JohnNielsen
Posts: 102
Joined: Tue Sep 14, 2010 10:21 pm

Re: wing and other sheetmetal repair

Post by JohnNielsen »

Dave Thorsness from Foley MN has been doing Cessna wings and controls for over 30 yrs. He has jigs to be able to completely start a wing from scratch if needed. Very fair pricing.
John
User avatar
n2582d
Posts: 2808
Joined: Mon Apr 29, 2002 4:58 am

Re: wing and other sheetmetal repair

Post by n2582d »

I would call Karl Anderson of Aircraft Northwest for recommendations in your neck of the woods.
Gary
Post Reply