Search found 402 matches
- Fri Feb 11, 2022 10:38 am
- Forum: The Hangar
- Topic: Jury Strut Chaffing Prevention
- Replies: 3
- Views: 1782
Re: Jury Strut Chaffing Prevention
Electrical tape has worked on my 48 for years.
- Thu Jan 20, 2022 2:00 pm
- Forum: The Hangar
- Topic: Braking with full right rudder
- Replies: 30
- Views: 28961
Re: Braking with full right rudder
I am aware of a parking brake being activated on full rudder. Are your parking brakes still connected?
- Fri Jan 07, 2022 8:26 pm
- Forum: The Hangar
- Topic: Aileron Fairlead PN 0412006 (split topic)
- Replies: 13
- Views: 8732
Re: Aileron Fairlead PN 0412006 (split topic)
You might see if any of these will work
Edited:
https://www.aircraftspruce.com/search/s ... s=fairlead
Edited:
https://www.aircraftspruce.com/search/s ... s=fairlead
- Wed Dec 08, 2021 4:48 pm
- Forum: The Hangar
- Topic: Scotts 3200 3 springs vs 5
- Replies: 4
- Views: 3984
Re: Scotts 3200 3 springs vs 5
The Tyco Scott “ Shimmy Checklist” instruction sheet location in the maintenance section page 2 line 6 states “Castle nut torque ( both wheel and bracket) 15 inch lbs min then if required continue clockwise to access cotter pin hole.
I have 5 springs in my 3200 and I have one with 3 on the project.
I have 5 springs in my 3200 and I have one with 3 on the project.
- Sun Dec 05, 2021 5:06 pm
- Forum: The Hangar
- Topic: Rudder Attachment Bolts
- Replies: 39
- Views: 52974
Re: Rudder Attachment Bolts
Poncho73 The lowest one of the 3 bearings is pn A-325-1 or A325-1 as in this post which might help you. https://forum.cessna170.org/forums/viewtopic.php?f=2&t=2271&start=0 In that post it is stated as follows: "The original bearing PN A325-1 (superceded to S1003-11A) lists for $10.70&qu...
- Mon Nov 01, 2021 4:53 pm
- Forum: The Pilot Lounge
- Topic: The Turn Back to the Airport after engine Failure
- Replies: 35
- Views: 20421
- Thu Aug 19, 2021 3:45 pm
- Forum: The Hangar
- Topic: IOWA'S 170
- Replies: 229
- Views: 375771
Re: IOWA'S 170
Spruce and Univair has these incorrectly labeled at Piper parts. In fact they are Scott parts that can be used on Cessna, Piper, Stinson and any other larger airframe a Scott tail wheel is installed. Spoke with Jim Dyer (Univair) about the TW spring kits at OSH this year. Both Spruce and Univair ha...
- Wed Aug 18, 2021 8:36 pm
- Forum: The Hangar
- Topic: Windshield Replacement
- Replies: 21
- Views: 9346
Re: Windshield Replacement
Doug: Acrylic does expand with temp and humidity. It also is more flexible at higher temperatures. Based on the manufacturers warnings I would not trim or drill at colder temperatures. You might get lucky at the colder temps but why chance it. I personally would want the windshield to stabilize at 6...
- Mon Aug 16, 2021 2:34 pm
- Forum: The Hangar
- Topic: Windshield Replacement
- Replies: 21
- Views: 9346
Re: Windshield Replacement
This from their website.
- Fri Aug 13, 2021 3:35 pm
- Forum: The Hangar
- Topic: Cheap Fuses
- Replies: 2
- Views: 1658
Re: Cheap Fuses
Counterfeit blade type automotive fuses have been around for years and well known in the automotive world.
Any examples of counterfeit AGS fuses?
Any examples of counterfeit AGS fuses?
- Thu Aug 05, 2021 2:08 pm
- Forum: Events/Fly-ins
- Topic: Oshkosh 2021
- Replies: 17
- Views: 16839
Re: Oshkosh 2021
Award winners are now posted on http://eaavintage.org/
- Sun Aug 01, 2021 9:17 pm
- Forum: The Pilot Lounge
- Topic: 170’s at Airventure 2021
- Replies: 9
- Views: 5751
Re: 170’s at Airventure 2021
Doug, Thanks for the pics. I did see your nice 170 and in the Vintage area all the way to the South end I estimated 40 170s. We hit a new high of 1240 airplanes in Vintage by Wednesday morning. It was good to see several friends there and we (VAA) are planning 170 group parking in 2023 for the 75th ...
- Fri Jul 23, 2021 11:57 pm
- Forum: The Hangar
- Topic: New 170B owner
- Replies: 144
- Views: 239803
Re: New 170B owner
Quite sure that will work for the 48. Diameter is correct and quickly measuring the height was within an 1/8 inch. I would try it. I would look at this one as a possible glass for the 170A. I am not sure if the 170A is a Garwin. 170A pn 0511199-5 and 210 is 0511199-50 (might be fitting differences) ...
- Thu Jul 22, 2021 6:53 pm
- Forum: The Pilot Lounge
- Topic: What did you buy for your 170 today?
- Replies: 357
- Views: 829510
- Thu Jul 22, 2021 6:21 pm
- Forum: The Hangar
- Topic: New 170B owner
- Replies: 144
- Views: 239803
Re: New 170B owner
Might look at this one: https://www.napaonline.com/en/p/BK_S65504?cid=paidsearch_shopping_dcoe_google&store=31342&campaign=GSC-Filtration&campaign_id=6478904302&adgroup_id=121544424384&adtype=pla&gclid=CjwKCAjwruSHBhAtEiwA_qCppqn6cEaSOE-WMsG6GCRU_Yoy3XUfrid_CG69aba47jUJnsWXdz...