The International Cessna 170 Association

Electrical tape has worked on my 48 for years.

I am aware of a parking brake being activated on full rudder. Are your parking brakes still connected?

You might see if any of these will work

Edited:

https://www.aircraftspruce.com/search/s ... s=fairlead

The Tyco Scott “ Shimmy Checklist” instruction sheet location in the maintenance section page 2 line 6 states “Castle nut torque ( both wheel and bracket) 15 inch lbs min then if required continue clockwise to access cotter pin hole.
I have 5 springs in my 3200 and I have one with 3 on the project.

Poncho73 The lowest one of the 3 bearings is pn A-325-1 or A325-1 as in this post which might help you. https://forum.cessna170.org/forums/viewtopic.php?f=2&t=2271&start=0 In that post it is stated as follows: "The original bearing PN A325-1 (superceded to S1003-11A) lists for $10.70&qu...

Spruce and Univair has these incorrectly labeled at Piper parts. In fact they are Scott parts that can be used on Cessna, Piper, Stinson and any other larger airframe a Scott tail wheel is installed. Spoke with Jim Dyer (Univair) about the TW spring kits at OSH this year. Both Spruce and Univair ha...

Doug: Acrylic does expand with temp and humidity. It also is more flexible at higher temperatures. Based on the manufacturers warnings I would not trim or drill at colder temperatures. You might get lucky at the colder temps but why chance it. I personally would want the windshield to stabilize at 6...

This from their website.

Counterfeit blade type automotive fuses have been around for years and well known in the automotive world.
Any examples of counterfeit AGS fuses?

Award winners are now posted on http://eaavintage.org/

Doug, Thanks for the pics. I did see your nice 170 and in the Vintage area all the way to the South end I estimated 40 170s. We hit a new high of 1240 airplanes in Vintage by Wednesday morning. It was good to see several friends there and we (VAA) are planning 170 group parking in 2023 for the 75th ...

Quite sure that will work for the 48. Diameter is correct and quickly measuring the height was within an 1/8 inch. I would try it. I would look at this one as a possible glass for the 170A. I am not sure if the 170A is a Garwin. 170A pn 0511199-5 and 210 is 0511199-50 (might be fitting differences) ...

[url]https://www.univair.com/cessna/cessna-1 ... crank/[url]

Might look at this one: https://www.napaonline.com/en/p/BK_S65504?cid=paidsearch_shopping_dcoe_google&store=31342&campaign=GSC-Filtration&campaign_id=6478904302&adgroup_id=121544424384&adtype=pla&gclid=CjwKCAjwruSHBhAtEiwA_qCppqn6cEaSOE-WMsG6GCRU_Yoy3XUfrid_CG69aba47jUJnsWXdz...