The International Cessna 170 Association

Thank you the advise what I was looking for I will seek out some that did the nice job that John has that is perfect!

Let me assure you I am in no way connected to any product, I am only trying for find out what others experiences have been with afore mentioned company before I buy the product mentioned or what alternates have been used, this if fact gathering only, no differnt than others commenting on Airtex inte...

Hello all: Does anyone have a pictures of control yokes that have used Warren Gregoire and Associates? and how did they work out? <edit: the original link provided in this post was detected to be corrupted/pirated… the moderator has revalidated/refreshed the link> https://controlyokecovers.com/ Or a...

50/50 water and isopropyl alcohol, flood the windshield with it , use a micro fiber towel with up and down motion, use one towel to remove the dirt and water and the the other clean one to finish one if needed, fold and turn over the towel as you remove the dirt, rewet the windhield if needed until ...

Hello Elijah: Welcome I am just North of you at 5GA2 and look forward to seeing you at one of the fly ins, tail number is N 2500C, red, white and blue. Charlie Wilson was a good friend who lived on your strip and did my annuals before he passed away, been down there many times to see him. If I can h...

Make sure that you have the log books in order. and your premium has been paid! in full!! Even though this was a '" not in motion" event, no pun intended, you as a pilot should not have any issues since you were not flying the airplane. Make sure you did not state anything on the applicati...

When short sheeting, do not forget to add the salt, between the sheets , in this case to rub into the wounds

I was wondering how many 170 owners have complied and what brand equipment did you buy and what did it cost you for the equipment and the installation?

That is one nice 170, it was for sale at OSH two years ago. I am pretty sure it is the same airplane. If you do not know the history get in touch with the guy that did the work, he is pretty interesting to talk to, I think the owner at the time I looked at it was an younger airline pilot and he boug...

See the PM sent to you

I feel for you and I have seen these type of inconsiderate people at airshows as well, I would have reamed that guy a new one and said you ARE going to pay for this, or tell me where you parked your car and I will add retaliatory dents in your car, only kidding, At an airshow long ago I was parked a...

I installed a landing and taxi light, both are Whelen LED Parmetheus , I got them for recognition more than anything else. I bought them at Oshkosh last year and they were on sale, about $190 each, Ff you are going to OSH shop around for deals or watch the websites for the vendors they may have OSH ...

here is another source,I have not used them but did look at them at OSH last year not bad looking

www.aircraftdoorseals.com/

48RagwingPilot wrote:What a coincidence! I just removed the Selkirk fiberglass version from my '48 C170. It's in good condition, trimmed and ready to install. Available at 60% of new + shipping.

PM sent to you