Search found 8 matches
- Tue Mar 23, 2021 9:27 pm
- Forum: The Hangar
- Topic: New tailwheel
- Replies: 4
- Views: 2106
New tailwheel
Hi All, first I want to say "Thank You" for this great forum and to the many folks that have helped me along the way. I am nearing completion of the restoration of 4526C, hoping to finally take flight next week after 5 years in the making, she hasn't flown since September 1988. One of our ...
- Tue Jun 23, 2020 12:45 am
- Forum: The Hangar
- Topic: Wing Nav lights
- Replies: 3
- Views: 3375
Wing Nav lights
I'm coming close to my 3 year rebuilding project of 4526C. My wing tip light assembles are rusted beyond repair, I found that the part numbers have changed to C622001-0102 and -0202. I've only found them at cessna parts for 1,300.00 each. So would the smart thing would be buy Orion 650 for 525.00 an...
- Sat Sep 28, 2019 9:07 pm
- Forum: The Hangar
- Topic: Aileron Bar Assembly independent aileron movement
- Replies: 4
- Views: 11501
Re: Aileron Bar Assembly independent aileron movement
Thanks everyone got it fixed. Universal and sprocket, cleaned and links lined correctly. Again thanks for the advice..
- Tue Sep 24, 2019 3:08 pm
- Forum: The Hangar
- Topic: Aileron Bar Assembly independent aileron movement
- Replies: 4
- Views: 11501
Aileron Bar Assembly independent aileron movement
I'm having trouble hooking up my ailerons cables. Everything is hooked up and thought to be good, but then we tested and found that we can turn ailerons independent of each other by holding both yolks and turn one while holding the other yolk. Seems to be something wrong with our hook up of the item...
- Mon Sep 16, 2019 5:37 pm
- Forum: The Hangar
- Topic: Diagram for control cables
- Replies: 13
- Views: 21170
Re: Diagram for control cables
I just finished replacing all cables and installing all the pullies. I had to crawl in the tail and disconnect the cables from the inside. I'm 6'4" 230 and I got in. Installing pullies, lot's of frustrations and time. Giving up at times and coming back 20 minutes later helped me. Sorry I don't ...
- Mon Sep 16, 2019 5:27 pm
- Forum: The Hangar
- Topic: Bellcrank link lengths
- Replies: 1
- Views: 9365
Bellcrank link lengths
I was going through previous post, found my question but no answer so I ask again since it was 5 years ago. Anyone know the center hole to center hole on part number 0310219-2 the rudder links item 31 figure 65. And the elevator links 0510160 item 24 figure 67 and 0310431-2 item 31 figure 67. Thanks...
- Mon Sep 16, 2019 4:40 pm
- Forum: The Hangar
- Topic: What's the difference?
- Replies: 11
- Views: 18303
Re: What's the difference?
I'm going through this old post asking for the lengths for the elevator links 0510160 the upper and 0310421-2 lower bellcrank link. Would anyone know the center hole to center hole for each link, and also lengths for the rudder links 0310219-2. Thanks for any help.
- Mon Jul 15, 2019 12:13 am
- Forum: The Hangar
- Topic: Diagram for control cables
- Replies: 13
- Views: 21170
Diagram for control cables
Looking for help. I picked up S/N 25405 been parked since 1988. I gutted it trying to restore. Not knowing alot I pulled all cables and pulleys without saving cables. I ordered a cable kit from McFarlanes. With only the parts manual we're having a hard time putting cables and pulleys together. Quest...