I am looking for a copy of the Lycoming SI 1029 if there are any members who have the
Lycoming conversion and have a copy could you let me know.
Thanks, Wes
c170bdriver@yahoo.com
Search found 25 matches
- Fri May 10, 2013 5:45 pm
- Forum: The Pilot Lounge
- Topic: Help needed if you run Lycoming's
- Replies: 1
- Views: 1815
- Sat Dec 10, 2011 3:24 pm
- Forum: The Hangar
- Topic: More Seat/Head Room?
- Replies: 1
- Views: 1042
More Seat/Head Room?
Looking for some expert advice: I have a friend who is 6' 5" and would like to get a 170. As he sits in my original seat set up its tight for him both Vertically and horizontally . What are the legal options to get more headroom or legroom? Are there other members who face this problem? Thanks ...
- Wed Oct 05, 2011 11:40 pm
- Forum: The Hangar
- Topic: Correct angle for pitot tube?
- Replies: 5
- Views: 10266
Re: Correct angle for pitot tube?
Fearless,
On page 16-9, figure 16-3 of the 100 series service manual you can find a template for the pitot tube contour.
Although it refers to the 172-175 models, it works well for the 170 also, I found it useful on my plane. Pm me your email and I can send you a copy if you need.
Wes
On page 16-9, figure 16-3 of the 100 series service manual you can find a template for the pitot tube contour.
Although it refers to the 172-175 models, it works well for the 170 also, I found it useful on my plane. Pm me your email and I can send you a copy if you need.
Wes
- Sat Sep 17, 2011 8:11 pm
- Forum: The Hangar
- Topic: Next obstacle to flying - Fuel Strainer
- Replies: 41
- Views: 18427
Re: Next obstacle to flying - Fuel Strainer
I think I have the exact one you need, nos for early 170, I will PM you.
Wes
Wes
- Sat Mar 05, 2011 3:03 pm
- Forum: The Hangar
- Topic: Fuel Pumps and '48s
- Replies: 8
- Views: 4889
Re: Fuel Pumps and '48s
Andrew,
I have a good fuel pump core if your interested, you can send it out for O/H, PM me.
Wes McCallum
I have a good fuel pump core if your interested, you can send it out for O/H, PM me.
Wes McCallum
- Fri Feb 25, 2011 5:37 pm
- Forum: The Hangar
- Topic: Revisiting Oil Quanity Dip Sticks
- Replies: 7
- Views: 2645
Re: Revisiting Oil Quanity Dip Sticks
Thanks George, I feel better! We were really excited when we ran across this engine since it was a first run,
we just need to put together a couple of missing items.
Wes
we just need to put together a couple of missing items.
Wes
- Fri Feb 25, 2011 2:36 pm
- Forum: The Hangar
- Topic: Revisiting Oil Quanity Dip Sticks
- Replies: 7
- Views: 2645
Re: Revisiting Oil Quanity Dip Sticks
George, Thanks for the download, however it does not address the 145 specifically, just the 300's, and I realize they are the same. The other item you mentioned was the sump number, it is possible the L is actually a miss stamped ( A ) since the last number which looks like a C is probably an 0. To ...
- Thu Feb 24, 2011 6:55 pm
- Forum: The Hangar
- Topic: Revisiting Oil Quanity Dip Sticks
- Replies: 7
- Views: 2645
Revisiting Oil Quanity Dip Sticks
Members, After reading the thread regarding the Oil Dip Stick P/N's I am still at a loss. I have been trying to figure out which is the correct one for an engine we are working on. The thread described it as follows: (In short, the correct dipstick has a part number etched.stamped onto it, and for a...
- Fri Dec 03, 2010 1:16 am
- Forum: The Hangar
- Topic: Oil filter options
- Replies: 10
- Views: 4188
Re: Oil filter options
KG
I have the firewall mounted oil filter system and have had no problems, its a slick installation and filter change is a snap.
Wes
I have the firewall mounted oil filter system and have had no problems, its a slick installation and filter change is a snap.
Wes
- Thu Nov 11, 2010 4:11 pm
- Forum: The Hangar
- Topic: Owner Advisory & Logbook Entry Questions
- Replies: 7
- Views: 4524
Re: Owner Advisory & Logbook Entry Questions
In regard to your second question, I have understood that if you replaced an item on the engine, such as a EGT Probe or Cylinder Temp Probe ie: any item attached to the engine, that would require a engine logbook entry. However if you change an instrument associated to the operation of that engine, ...
- Sat Nov 06, 2010 2:38 pm
- Forum: The Hangar
- Topic: Correct P/N for Cleveland W/B's ?
- Replies: 2
- Views: 1696
Re: Correct P/N for Cleveland W/B's ?
Gary,
Thanks for that information and chart! Its greatly appreciated!
Wes
Thanks for that information and chart! Its greatly appreciated!
Wes
- Sat Nov 06, 2010 1:18 am
- Forum: The Hangar
- Topic: Correct P/N for Cleveland W/B's ?
- Replies: 2
- Views: 1696
Correct P/N for Cleveland W/B's ?
Membership: Would anyone be able to confirm the part numbers for the brake disc used in the conversion kit for the B model? The STC gives the conversion kit number 199-46, which indicates the use of the 30-63A brake and 40-97A wheels, but fails to mention the brake disc. The Cleveland Technician gui...
- Mon Sep 20, 2010 12:55 am
- Forum: The Hangar
- Topic: Station Reference sheet
- Replies: 7
- Views: 5246
Re: Station Reference sheet
Gahorn,
Yep, that is the situation.....it has not been weight in years and all the additions apply, thanks, that will help me figure out some of the questions,
but I agree it time to weight the plane, I like to know exactly where I stand. I'm just too picky I guess
Wes
Yep, that is the situation.....it has not been weight in years and all the additions apply, thanks, that will help me figure out some of the questions,
but I agree it time to weight the plane, I like to know exactly where I stand. I'm just too picky I guess
Wes
- Sun Sep 19, 2010 3:50 am
- Forum: The Hangar
- Topic: Station Reference sheet
- Replies: 7
- Views: 5246
Re: Station Reference sheet
Blue4,
I am trying to update the the equipment list with all the items that had been installed and not documented very well, I may just have to have the aircraft
reweighed.
Wes
I am trying to update the the equipment list with all the items that had been installed and not documented very well, I may just have to have the aircraft
reweighed.
Wes
- Thu Sep 16, 2010 3:16 pm
- Forum: The Hangar
- Topic: Station Reference sheet
- Replies: 7
- Views: 5246
Re: Station Reference sheet
Thanks John, I was hoping that someone had a sheet set up to make it more precise.
Wes
Wes