Search found 3827 matches
- Sun Oct 09, 2016 6:06 pm
- Forum: The Hangar
- Topic: Heater Control Friction
- Replies: 7
- Views: 22152
Re: Heater Control Friction
If this is a Boden wire control, a slight kink in the housing and wire will put some friction on it to keep it from creeping.
- Thu Oct 06, 2016 3:05 pm
- Forum: The Hangar
- Topic: installing Cessna 175 tanks in my Cessna 170b
- Replies: 27
- Views: 93370
Re: installing Cessna 175 tanks in my Cessna 170b
The simplest way is to install a set of C-175 wings on a pre-approved 337.
- Wed Aug 10, 2016 4:09 am
- Forum: The Pilot Lounge
- Topic: Wasps!
- Replies: 20
- Views: 41753
Re: Wasps!
If your battery is really seven years old, it is just waiting for the worst possible place in the world to completely fail.
- Mon Aug 08, 2016 2:22 am
- Forum: The Hangar
- Topic: Weight distribution
- Replies: 15
- Views: 30241
Re: Weight distribution
What is the result of the preliminary calculation using your present weight and balance data? I would suggest a new weighing if the present data is old.
- Mon Aug 08, 2016 2:14 am
- Forum: The Pilot Lounge
- Topic: Pain
- Replies: 10
- Views: 30110
Re: Pain
All serious Cessna pilots havs diamond scars on their forehead.
- Mon Aug 08, 2016 2:11 am
- Forum: The Pilot Lounge
- Topic: What do I buy
- Replies: 13
- Views: 31624
Re: What do I buy
The maintainence on a C-!70 is waaayyyy easier than on a C-172 simply because there is no hydraulic strut on the tail wheel.
- Thu Aug 04, 2016 4:12 pm
- Forum: The Hangar
- Topic: Skytec Starter Upgrade
- Replies: 28
- Views: 56428
Re: Skytec Starter Upgrade
The TCM IO-360 engine that I installed in my '52 C-170B came off the front of a Cessna C-337 and was equipped with a 24v starter and alternator (or generator). Since I was going to maintain the 12v system of my C-170, I decided to install a light weight, 12v, Sky Tec starter. On the first engine shu...
- Thu Aug 04, 2016 3:34 pm
- Forum: The Hangar
- Topic: Brake caliper location question
- Replies: 7
- Views: 15992
Re: Brake caliper location question
In regard to the removal of the parking brake hardware, is this an approved modification?
Does it require a "Notifying Decal" of some sort in the cockpit in addition to a log book entry?
Does it require a "Notifying Decal" of some sort in the cockpit in addition to a log book entry?
- Thu Aug 04, 2016 2:57 pm
- Forum: The Pilot Lounge
- Topic: Continental IO-360AF -- money talks
- Replies: 14
- Views: 34961
Re: Continental IO-360AF -- money talks
In reading an above item this thread, I note a question of my installing a "D" model TCM IO-360 engine in my '52 C-170B on Tom Anderson's STC.
I questioned Tom about that at the time that I picked up the engine mount, and he allowed as how that would be OK.
I questioned Tom about that at the time that I picked up the engine mount, and he allowed as how that would be OK.
- Tue Aug 02, 2016 3:07 pm
- Forum: The Hangar
- Topic: Skytec Starter Upgrade
- Replies: 28
- Views: 56428
Re: Skytec Starter Upgrade
Why didn't you simply install a new oil seal in your old starter? They only cost a couple of bucks and you don't have to grind off the part in the engine risking metal contamination in the guts of the engine.
- Wed May 04, 2016 3:00 pm
- Forum: The Hangar
- Topic: Vacuum Relief Valve Adjustment
- Replies: 30
- Views: 77576
Re: Vacuum Relief Valve Adjustment
My '52 model had two 4 inch venturis and seemed to do just fine. I never did think that the C-170 made a good airplane for flying "Hard" IFR. It just didn't seem to be enough airplane. That was, perhaps, a result of having flown mostly large airplanes such a transports and bombers that wer...
- Tue May 03, 2016 2:47 pm
- Forum: The Hangar
- Topic: Is this normal? (Primer use creates fuel stain)
- Replies: 19
- Views: 49835
Re: Is this normal?
Perhaps you may not have the proper primer fitting in the botton if the intake manifold. If someone has inadvertantly installed a standard flare fitting. the primer pump will pump way to much fuel in on each stroke.
- Tue May 03, 2016 2:40 pm
- Forum: The Hangar
- Topic: Paint Shops in the Northwest?
- Replies: 10
- Views: 20797
Re: Paint Shops in the Northwest?
I've seen some outstanding paint jobs that came out of the shop in Red Bluff, CA. I don't know about their prices or whether they're still there. A lot of paint shops moved out of California because of the environmental regulations.
- Wed Apr 27, 2016 2:24 pm
- Forum: The Pilot Lounge
- Topic: Prop RPM Avoid Range Operation
- Replies: 15
- Views: 41202
Re: Prop RPM Avoid Range Operation
In view of the above comment, as I remember there seems to be VERY FEW C-170 aircraft thast are likely to pull over thirty inches of manifold pressure except maybe in parts of Death Valley, or the Salton Sea, in CA.
- Mon Apr 25, 2016 4:10 pm
- Forum: The Hangar
- Topic: What tailwheel is this?
- Replies: 22
- Views: 32110
Re: What tailwheel is this?
Ed,
If memory serves, I think it was an Oregon Purple Plum Can, They're my all time favorite!
If memory serves, I think it was an Oregon Purple Plum Can, They're my all time favorite!