Search found 2296 matches
- Wed May 15, 2024 2:28 pm
- Forum: The Hangar
- Topic: Tailwheel tie down ring - winch point
- Replies: 5
- Views: 330
Re: Tailwheel tie down ring - winch point
I’ve calculated that, at gross weight, to go from the forward C.G. limit to the rear C.G. limit would amount to a change of 54 lbs. at the tailwheel. I wonder how much 54 lbs. would change the kingpin angle? I doubt it would be more than a degree. Do any of you notice the tailwheel more likely to sh...
- Wed May 15, 2024 12:40 pm
- Forum: The Hangar
- Topic: Tailwheel tie down ring - winch point
- Replies: 5
- Views: 330
Re: Tailwheel tie down ring - winch point
Rob, I think it would be much more likely that the tailwheel mainspring was tweaked if one was pulling from the tailwheel axle than from the tie down ring. Bruce has posted Scott’s tailwheel shimmy checklist here . I’d never noticed that they say, on item seven, that the center spindle should be “pe...
- Fri May 03, 2024 4:18 pm
- Forum: The Pilot Lounge
- Topic: Care's FAA Question
- Replies: 4
- Views: 511
Re: Care's FAA Question
John,
I’m also unable to access these aircraft records. I don’t think the issue has anything to do with our computer equipment. I’ll try contacting FAA OKC.
I’m also unable to access these aircraft records. I don’t think the issue has anything to do with our computer equipment. I’ll try contacting FAA OKC.
- Mon Apr 29, 2024 10:28 pm
- Forum: The Pilot Lounge
- Topic: different engines in 170,s
- Replies: 6
- Views: 2431
Re: different engines in 170's
Ghostflyer mentioned that the engine came from an L-19. The L-19 came with two versions of the O-470. The O-470-11 or -11B used a fix pitch prop. The O-470-15 used the constant speed prop. 391 lbs. and 408 lbs. dry weight respectively according to the TCDS. Researching the FAA database for the C-170...
- Sat Apr 27, 2024 5:34 am
- Forum: The Hangar
- Topic: delco starter 1109656
- Replies: 13
- Views: 9798
Re: delco starter 1109656
The shoulder bolt, p/n 1915145, is available from Fresno Air Parts
Airward has a used lever, p/n 1908524, for sale.
Preferred Air Parts has the lever as well as the lever extension, Cessna p/n 0450283, in stock.
Airward has a used lever, p/n 1908524, for sale.
Preferred Air Parts has the lever as well as the lever extension, Cessna p/n 0450283, in stock.
- Wed Apr 24, 2024 4:59 pm
- Forum: The Hangar
- Topic: Oil Leak
- Replies: 29
- Views: 20995
Snap Ring Orientation
Apologies in advance for the thread drift. My previous entry about snap ring orientation should not be used when installing the crankshaft counterweight pins. The overhaul manual specifies that the snap ring be installed “with the flat or rough side to the outside.” Similar instructions are shown on...
- Wed Apr 24, 2024 4:16 am
- Forum: The Hangar
- Topic: Piston Rings for Chrome Cylinders
- Replies: 1
- Views: 1584
Piston Rings for Chrome Cylinders
Continental shows the ring set for the chrome barrel to be p/n 653394. They are available from an online auction site where it has the following picture displaying the individual rings: s-l1600.jpg What doesn't make sense is that these rings in the O-300 IPC are not the ones listed for chrome cylind...
- Wed Apr 24, 2024 3:29 am
- Forum: The Hangar
- Topic: Continental O-300 interchangeable parts list
- Replies: 2
- Views: 1701
Re: Continental O-300 interchangeable parts list
There's also this database I found online.
- Tue Apr 23, 2024 5:43 am
- Forum: The Hangar
- Topic: L.E.D. Navigation/Strobes/Interior Lights
- Replies: 159
- Views: 248207
1/4” Hole in Crankshaft Flange
This is a continuation from the off-topic discussion on page two of this thread regarding dampened crankshafts. The connection to LED lights is that these lights use less current and thus provide an alternative to installing 35 amp. generators which require dampened crankshafts, i.e. crankshafts wit...
- Tue Apr 23, 2024 4:51 am
- Forum: The Hangar
- Topic: O-300D crank
- Replies: 10
- Views: 6228
Re: O-300D crank
Only 12 years late in answering this but, according to SIL05-3A, the “F” is a shipping designation. B=Wood crate, F=Factory packaging. SIL05-3A.pdf Note that this Service Information Letter says it is for “all current production engines” so it’s possible that the “F” meant something different 70 yea...
- Mon Apr 15, 2024 6:10 pm
- Forum: The TradeMart
- Topic: Found: Lens/Cap for Safe Flight Warning Horn unit
- Replies: 2
- Views: 1151
Re: Wanted: Lens/Cap for Safe Flight Warning Horn unit
Google "red dialco" to see numerous options. You're looking for a cap that fits a indicator lamp for a 11/16" mounting hole.The lens is frosted. This looks like it might work. Stall Warning Light.jpg I see here that they also made an adjustable lens cap. As it might be possible to ina...
- Tue Apr 09, 2024 11:48 am
- Forum: The Hangar
- Topic: My 170 will be parked for 6 months. Anything I should do?
- Replies: 3
- Views: 844
Re: My 170 will be parked for 6 months. Anything I should do?
It looks like that Service Bulletin has been incorporated into Chapter 9-1 of the Standard Practice Maintenance Manual.
- Mon Apr 08, 2024 6:35 am
- Forum: The Hangar
- Topic: Oil Leak
- Replies: 29
- Views: 20995
Re: Oil Leak
I was going to say make sure and install the snap ring correctly as it’s easy to install them backwards. I’m embarrassed to say that I was about to give the wrong advice. Here’s the right way according to this website:
- Sun Apr 07, 2024 5:06 pm
- Forum: The Hangar
- Topic: Oil Leak
- Replies: 29
- Views: 20995
Re: Oil Leak
There are two options for plugs; what you have — p/n 25149, or a hubbard plug — p/n 24770. As you can see in the last column of the IPC, p/n 25149 is useable on code C and E which translates to the C145-2H and the O-300B engines. Remove the snap ring and pull on the plug center nub with a pliers to ...
- Sat Apr 06, 2024 9:38 pm
- Forum: The Hangar
- Topic: Oil Leak
- Replies: 29
- Views: 20995
Re: Oil Leak
Larry, I also have an O-300B engine. The plug which is retained by the snap ring has a groove in it. IMG_0770.jpeg The AN6227-28 o-ring fits in this groove. AN6227-28 is an obsolete part number and is replaced by MS28775-325. Looking at the chart in Genuine Aircraft Hardware’s catalog, one might con...